Delivered to your door | Shipping policy changes as of 1st of JulyShipped icon

Cabots Exterior Varnish Stain

Cabots Exterior Varnish Stain

Bring your outdoor surfaces to life! This combined semi-transparent stain and varnish is highly durable and provides protection, colour and shine to timber surfaces – without hiding the grain.

$41.50$113.00

Select Colour
Add to Wishlist
Add to Wishlist

Need assistance? Contact us

DESCRIPTION

Bring your outdoor surfaces to life! This combined semi-transparent stain and varnish is highly durable and provides protection, colour and shine to timber surfaces – without hiding the grain. Exterior durable technology means only three coats are required as opposed to the five or more coats required for some other products.

Areas
Exterior Timber including doors, furniture, trim, windows

Clean up
Water

Sheen
Semi Gloss

Coverage
12M2/L

Recoat Time
2 Hours

PREPARATION

New Bare Timber
To coat new bare timber immediately, scrub damp timber with Cabot’s New Timber Prep, following label instructions. New Timber Prep will draw out tannins and oils quickly from the surface, allowing you to skip the 4-6 weeks weathering process required for new timber. Always follow New Timber Prep with Cabot’s Deck Clean following label instructions. Remove excess water from the surface with squeegee on Cabot’s Deck Prep brush, and allow timber to dry for at least 1 hour. Note: Cooler conditions could slow down the drying time of the timber.

Previously Painted or Varnished Timber
Remove back to bare timber using a paint stripper, or sanding. For exterior surfaces clean with Cabot’s Deck Clean following label instructions.

Previously Stained and Oiled Timber
For exterior surfaces clean with Cabot’s Deck Clean following label instructions. Test if the surface is ready for coating by sprinkling water on the timber. If the water beads on the surface, repeat the application of Cabot’s Deck Clean. If water is absorbed into timber, it is ready for coating. For a more transparent look, sand timber back to bare before coating.

Weathered and Grey Timber
For best results, sand timber back to fresh substrate. Clean with Cabot’s Deck Clean following label instructions.

APPLICATION

1. Stir thoroughly with a broad flat paddle before and during use.
2. Apply liberally along the length of the timber including exposed edges and end grain by brush. The initial milky colour helps with even product application, drying to a semi-transparent finish.
3. Apply three coats allowing 2 hours between coats

Cabots Exterior Varnish Stain Safety Data Sheet HERE
Cabots Exterior Varnish Stain Product Data Sheet HERE

Reviews

There are no reviews yet

Add a review
You must be logged in to post a review Log In

Paint Calculator

Disclaimer: Direct Paint Calculator is provided as a guide only, further details are available at the bottom of the page.

Hidden

Paint Colour

SELECT A COLOUR

Chocolate Brown

Cabots D&E

Colonial Baltic

Cabots Exterior varnish Stain

Dark Oak

Intergrain Natural Stain

Forest Grey

Cabots Exterior varnish Stain

Gunmetal Blue

Cabots Exterior varnish Stain

Jarrah

Cabots Interior Stain

Light Blue

Cabots Exterior varnish Stain

Light Cedar

Cabots Exterior varnish Stain

Maple

Intergrain UltraClear

Meranti

Cabots D&E

Mustard

Cabots Exterior varnish Stain

Olive Green

Cabots Exterior varnish Stain

Opal Green

Cabots Exterior varnish Stain

Oregon

Cabots Exterior varnish Stain

Pacific Blue

Cabots Exterior varnish Stain

Pastel Grey

Cabots Exterior varnish Stain

Rich Walnut

Cabots Exterior varnish Stain

Rose Mahogany

Cabots Exterior varnish Stain

Sea Green

Cabots Exterior varnish Stain

Shell Pink

Cabots Exterior varnish Stain