Cabot’s CFP Floor Water Based is a clear flooring polyurethane suitable for all interior timber parquetry and cork flooring. Highly durable, it’s been formulated to be hard wearing and has a fast drying finish. No sanding is required on pre-coated timber, saving you a time and hassle.

Areas

Floors, Solid Timber, Cork, MDF

Clean Up

Water

Sheen

Matt, Satin, Gloss

Coverage

16 M2/L

Recoat Time

2 Hours

Preparation

^ No sanding required.

No sanding is required for pre-coated timber floors, preparation steps below must be followed. Please note new timber must be sanded.

Remove stains, dirt, wax, grease and oil with mineral turpentine.

Remove any polish with a suitable floor polish remover.

Note: Floors with highly visible scratches, imperfections or floors that are severely worn must be sanded prior to coating.

Bare Timber

Sand the surface smooth using 180 – 240 grit sandpaper. Sand only in the direction of the grain. Remove all traces of sanding dust.

Previously coated floors & timber floating floors

Thoroughly clean the surface with Cabot’s Floor Clean and allow to dry. Apply one coat to a small test area. Allow to dry for 3 hours. Press sticky tape firmly to the surface and pull off quickly. If the coating comes off, sanding back to a sound surface will be required.

Note: Fill nail holes, cracks and other defects with Cabot’s Wood Tone Putty after applying the first coat of this product for accurate colour matching.

Product Data Sheets

SDS Cabot’s CFP Floor Water Based

Slip Resistance Certificate Cabot’s CFP Water Based Satin

PDS Cabot’s CFP Floor Water Based Satin

PDS Cabot’s CFP Water Based Gloss

PDS Cabot’s CFP Floor Water Based Matt