Dulux Acratex AcraPatch is a high‑performance acrylic patching compound made to fill and level surface imperfections before applying texture, render or protective coatings. It comes as a water‑based paste that you mix with a small amount of cement to strengthen the repair and improve adhesion. Because it dries with minimal shrinkage and bonds well to masonry surfaces, you can prepare walls efficiently and smoothly for your topcoat.

Key Features & Benefits

• Fills and smooths blemishes — covers holes and irregularities so your textured or finish coats go on evenly.

• Water‑based acrylic formula — applies easily and cleans up with water.

• Mixes with cement — lets you strengthen and tailor the patch for best results.

• Minimal drying shrinkage — helps patches stay flush with the surface after drying.

• Good adhesion to masonry — bonds well to clean concrete, bricks and rendered surfaces.

• Fast and efficient application — touch dry in about an hour and recoat within 24 hours, so you can keep your project moving.

How to Use

First, clean the surface thoroughly so it’s free of loose dust and debris. Then, mix AcraPatch with the recommended amount of cement and stir until smooth. Next, apply the mix with a trowel and press firmly into cracks, holes and uneven areas. After the patch dries, sand or smooth the surface if needed. Finally, apply your texture coat, render or finish system over the prepared area for a uniform look.

Whether you’re repairing exterior walls or fixing interior masonry blemishes, Dulux Acratex AcraPatch helps you prepare surfaces quickly, reduce imperfections and create a smooth base for long‑lasting coatings.

Click here for more information on the Coarse

Click here for more information on the Fine