A washable paint that has been developed to resist the growth of bacteria and mould on walls, which may trigger asthma and allergy symptoms. Containing 101 Barrier Technology, it creates a hard wearing finish that allows most common marks, scuffs and stains to be easily wiped away with a wet cloth.

Features

• Antimicrobial protection
• 7 year guarantee against mould growth*
• Withstands wear and tear
• Low odour & Low VOC at <16g/L tinted & untinted (Volatile Organic Compounds contribute to atmospheric pollution)
• Available in Vivid White base
• Available in 4L, 10L, 15L

Benefits

• Resists bacteria and mould which may trigger asthma and allergies
• Exceptional washability

Uses

The hard wearing surface formed by Wash&Wear’s exclusive 101 Barrier Technology is fortified with antimicrobial protection to defend against the growth of bacteria and mould. This helps to maintain indoor air quality.

Surface preparation

Surface must be clean, dry and free from dust, oils and grease. Cracks or holes with filler: Spot prime repairs with Dulux 1 Step Water Based. Glossy surfaces: Lightly sand to a dull finish. Unpainted plasterboard, brick, cement: One coat of Dulux 1 Step Water Based. Bare timber: One coat of Dulux 1 Step Water Based. Set plaster, fibrous plaster, plasterglass: One coat of Dulux Sealer Binder. Treating Existing Mould: Remove mould with Selleys® Rapid Mould Killer or by scrubbing with a scouring pad and bleach solution (1 part bleach to 3 parts water). Leave solution on the surface for 15 minutes then wash with clean water and wipe dry. Several applications may be necessary to remove stubborn mould blooms.

General

Coverage

12-16 square metres per L

Surfaces

Plasterboard, Brick, Cement, Bare Timber, Set plaster, Fibrous Plaster, Plasterglass, Concrete, Masonry

Type

Wall

Area

Wall

Range

Wash&Wear +PLUS

Room Space

Bedroom, Living room, Hallway, Dining room, Lounge, Playroom

Interior or Exterior

Interior